CheckHazmat
CheckHazmat / Guides / 49 CFR 172.315

Limited Quantity Diamond Label Rules (49 CFR § 172.315)

The black-and-white Limited Quantity diamond replaces full DOT hazard diamonds and UN-rated boxes for eligible consumer products — but taping over borders or using the wrong size still triggers rejections.

Exact Specification Under 49 CFR § 172.315

RequirementStandard RuleCommon Mistake That Fails Inspection
Shape & Color Square-on-point (45° diamond): solid black top and bottom corners, white center, black border ≥2 mm wide Printing faint grayscale on a dying thermal printer or placing white border on a white mailer without a visible black outline
Minimum Size 100 × 100 mm (4 × 4 inches) standard. May reduce to 50 × 50 mm (2 × 2 inches) ONLY if package size requires it (border ≥1 mm). Putting a 2×2 sticker on a large 12×12×12 shipping carton where a 4×4 easily fits
Blank Center vs. “Y” Center Blank white center = Ground / highway / rail / vessel. “Y” in center = Air-compliant Limited Quantity (much stricter inner packaging & pressure tests!). Buying “Y” air stickers for ground-only boxes — falsely declares the box passed strict air packaging tests
Placement & Tape Applied flat on ONE vertical side (not folded over an edge or corner seam), completely unobstructed by packing tape, straps, or shipping labels. Wrapping the diamond tip around a box corner or letting the shipping label overlap a black corner
Orientation Arrows (§ 172.312) Required on two opposite vertical sides for combination packagings containing liquid inner bottles (except exempt hermetically sealed or ≤120 mL inner bottles with full absorbent). Shipping upright glass perfume/acid bottles on their side with no “This Side Up” arrows

Verify Your Actual Package, Label, or UN Box Before Pickup

Run a cross-carrier Quick Check (USPS, UPS, FedEx), drop a 4×6 USPS PDF label, decode a 49 CFR 178.503 UN box code, or check LTL pallet segregation — 100% locally in your browser with zero data uploaded.